The Green Air range

Growth Technology would like to proudly announce their new collaboration with legendary US company Green Air Products.

Growth Technology is making available a carefully selected range of Green Air products for the European market. All of these products have been redesigned to work faultlessly in European conditions and all carry the CE mark as required by law.

For more information – much more information – please visit the brilliant Green Air website at www.greenair.com There are two GreenAir Catalogues available for download. They will take a few minutes to download but they will be worth the wait. The GreenAir Equipment Catalogue covers their extensive range of enironmental and CO2 controllers - some of which are available to European specification from Growth Technology. The GreenAir Solutions Catalogue is dedicated to their liquid products - including Genesis Nutrients - which are now available from Growth Technology

The GA range includes Temperature and Humidity controllers and some of these have optional modules for CO₂ control.

These products have been developed in the US over a long period and they are widely considered as the best available in our industry.

If you are interested in quality environmental controllers then please just ask the local hydroponic store for the Green Air range. If they do not have them in stock they will be able to get them in very quickly.

Here is an outline of the products available here in UK.

CT-DH-3P

Cooling thermostat and dehumidifying humidistat with extra socket that will turn off CO₂ release equipment when fans are activated. Features a photo sensor, which automatically turns off the CO₂ outlet at night.

 

CYCLESTAT 4

Repeat cycle timer with 5 seconds to 30 minute ON time and 7 minute to 8 hours OFF time. Can be used to control pumps, fans or CO₂ release. This unit also features a switchable, built-in, photo sensor.

 

MCC-1

Microclimate controller incorporating a thermostat and a humidistat. Also features a 24hr timer with two independent outlets that can be used for lighting or fans and a repeat cycle timer for controlling pumps or CO₂ release. This controller can be connected to the CDDS-2 CO₂ sensor.

 

TEMP H/C

Temperature thermostat with 7.5 amp switching capacity. Can be switched between heating and cooling for summer or winter use.

 

CDMC-6-1

CO₂ controller - incorporating an infrared sensor and digital display panel with user settable CO₂ level and hysteresis (span). Will operate any 220v device: i.e. Gas Regulator or Growth Gas Generator, to raise and control the CO₂ level.